Lexmark T652 Service Manual - Page 186

4062 Step Check Check the above sensor for proper connection. Is the above sensor connected properly? Yes Replace the sensor (output pass through). Go to "High capacity stacker sensor (pass through) removal" on page 4-144. Go to "5-bin mailbox sensor (pass through) removal" on page 4-90. Go to "Output expander sensor (pass through) removal" on page 4-169. No Replace the connection. 4 5 Perform a print test using the output option. Does the error continue? Replace the output option. Problem solved. Sensor (output pass through) static jam service check Step 1 Check Check the media path for partially fed or jammed media. Is the media path free from partially fed or jammed media? Yes Go to step 2. No Remove any prestaged or jammed media. Go to step 3. 2 Check the sensor (output pass through) for proper operation. 1. Enter the diagnostic mode 2. Select Output bin tests 3. Select Sensor test 4. Select Output bin x 5. Observe the line item "passthru" Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked. Go to step 4. 2-152 Service Manual