Lexmark T652 Service Manual - Page 119

4062 Error code or message 906.xx Error contents Description/Action Possible repair actions RIP interface driver error Code detected unusual event or timing. 1. POR the machine and print a simple test page to determine if the problem is system software related, or if the customer is sending a corrupted print job. 2. Check all connections on the system card assembly. 3. Replace the system card assembly if problem remains. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. 1. Check all the connections on the pick arm assembly. 2. Check all the connections on the system card assembly. 3. Replace the pick arm assembly if problem remains. Go to "Operator panel door assembly removal (models X651, X652, X654, and X656)" on page 4-49. 910.00 Pick arm motor stalled failure The pick arm motor has stalled or become obstructed. 911.00 Pick arm motor overrun failure The pick arm motor encoder continues to detect pulse after the motor stops. 1. Check all the connections on the pick arm assembly. 2. Check all the connections on the system card assembly. 3. Replace the pick arm assembly if problem remains. Go to "Operator panel door assembly removal (models X651, X652, X654, and X656)" on page 4-49. 912.00 Pick arm motor underspeed failure The pick arm motor does not rotate at the specified speed. 1. Check all the connections on the pick arm assembly. 2. Check all the connections on the system card assembly. 3. Replace the pick arm assembly if problem remains. Go to "Operator panel door assembly removal (models X651, X652, X654, and X656)" on page 4-49. 913.00 Pick arm motor overspeed failure The pick arm motor does not rotate at the specified speed. 1. Check all the connections on the pick arm assembly. 2. Check all the connections on the system card assembly. 3. Replace the pick arm assembly if problem remains. Go to "Operator panel door assembly removal (models X651, X652, X654, and X656)" on page 4-49. Diagnostic information 2-85