Lexmark T652 Service Manual - Page 75
Lexmark T652 Manual
View all Lexmark T652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
4062 Error code or message 239.07 Error contents Description/Action Possible repair actions Select output device error. Source = External duplex Mechanical feed error or timing error. 1. Remove all media present in media path. 2. Check media for proper installation. 3. Check for obstructions in media path. 4. Ensure the external duplex assembly is properly installed. 5. Ensure the rear door of the external duplex is fully closed. 6. Check all connections on the external duplex assembly. 7. Replace the external duplex assembly if problem remains. 1. Remove all media present in media path. 2. Check media for proper installation. 3. Check for obstructions in media path. 4. Ensure the external duplex assembly is properly installed. 5. Ensure the rear door of the external duplex is fully closed. 6. Check all connections on the external duplex assembly. 7. Replace the external duplex assembly if problem remains. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-129. 1. Remove all media present in media path. 2. Check media for proper installation. 3. Check for obstructions in media path. 239.08 Input source ready error. Source = External duplex Mechanical feed error or timing error. 239.11 Sensor (input) late jam from duplex Source = External duplex Media is late reaching the sensor (input) within the specified time during the second side printing using the external duplex. The media is jammed in the media tray 1 area. 241.00 Media tray 1 area jam Source = Tray 1 Diagnostic information 2-41