Lexmark T652 Service Manual - Page 48

4062 Error code table 1 Error code or message 200.00 Error contents Description/Action Possible repair actions Sensor (input) area jam The media is jammed in the sensor (input) area. 1. Fan the media and check for obstructions. 2. Go to sensor (input) service check. See "Sensor (input) service check" on page 2-126. 200.01 Sensor (input) lingering jam Source = MPF, duplex or envelope feeder The media reached the sensor (input) but did not clear it within the specified time. 1. Fan the media and check for obstructions. 2. Go to sensor (input) lingering jam service check. See "Sensor (input) lingering jam service check." on page 2-132. 200.02 Sensor (input) lingering jam The media reached the sensor (input) but did not clear it within the specified time. 1. Fan the media and ensure it is properly installed. 2. Go to sensor (input) lingering jam service check. See "Sensor (input) lingering jam service check." on page 2-132. 200.04 Sensor (input) early jam The media reached the sensor (input) sooner than the specified time. Wrong config ID causes engine to assume 500 paper path on 250 model. 1. Fan the media and ensure it is properly installed. 2. Go to sensor (input) early jam service check. See "Sensor (input) early jam service check" on page 2-133. Go to sensor (input) service check. See "Sensor (input) service check" on page 2-126. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-129. 1. Fan the media and ensure it is properly installed. 2. Go to sensor (input) early jam service check. See "Sensor (input) early jam service check" on page 2-133. 200.06 Sensor (input) early jam The sensor (input) rebounded once the trailing edge of the media passed. 200.07 Sensor (input) late jam Source = input option tray The media is late reaching the sensor (input) within the specified time. 200.08 Sensor (input) early jam The media reaches the sensor (input) sooner than the specified time. 2-14 Service Manual