Lexmark T652 Service Manual - Page 218

4062-XXX The print registration range is: Variable Description T= Top margin Value -25 to +25 Each increment causes approximately 4 pels shift (at 600 dpi). Direction of change A positive change moves the image down the page and increases the top margin. A negative change moves the image up and decreases the top margin. A positive change compresses the image so it appears to move down the page and a negative change moves the image up. A positive change moves the image to the right, and a negative change moves the image to the left. No compression occurs. A positive change moves the image to the right, and a negative change moves the image to the left. B= Bottom margin -20 to +20 Each increment causes approximately 0.55 mm shift in the bottom margin. -25 to +25 L= Left margin R= Right margin - 99 to +99 5. Continue changing the settings by repeating steps 2 through 4. 6. Print another copy of the Quick Test to verify your changes. 7. To exit REGISTRATION, press Back . Quick Test The Quick Test contains the following information: Device information Current page count, installed memory Processor speed Serial number Engine ID System card ID Printer revision levels Printer margin settings Alignment diamonds at the top and bottom Horizontal lines to check for skew To print the Quick Test page: Note: Print the Quick Test Page on letter or A4 paper. 1. Select REGISTRATION from DIAGNOSTICS. 2. Press until the appears next to Quick Test. The message Quick Test Printing...appears on the display. Once the Quick Test Page completes printing, the Registration screen displays again. 3-6 Service Manual