Lexmark T652 Service Manual - Page 266

4062-XXX Factory Defaults This setting enables a user to restore all the printer settings to the original factory settings. Selections are Restore Base, Restore STD NET, or Restore LES. Restore LES enables you to remove all Lexmark Embedded Solutions applications (LES). Network does not appear unless you have a network printer. The following settings are not changed: • Display language • Settings in the NETWORK/PORTS MENU group. To reset factory defaults: 1. Touch 2. Touch to select Factory Defaults from the Configuration Menu. to select either Restore Base, Restore STD NET, or Restore LES. Note: There is no confirmation, and selecting one of these settings immediately takes effect. The printer restarts and returns to Ready state. Restoring Factory Defaults and then Resetting the Device are displayed. Factory Defaults Restore Base Restore STD Net Restore LES Back Energy Conserve This menu controls what values appear on the Power Saver menu. If Off is selected in Energy Conserve menu, then Disabled appears in the Power Saver menu, and Power Saver can be turned off. If On is set in Energy Conserve, the Power Saver feature cannot be disabled. 1. Touch to select Energy Conserve from the Configuration Menu. 2. The panel displays the setting's name in the header and [setting's current value] below the header row. Touch or to change the setting. The selections are On and Off. The default is On. 3. Touch Submit to save your change. Touch Back to exit without changing the value. 3-54 Service Manual