Lexmark T652 Service Manual - Page 112

4062 Error code or message 28x.48 x = bin number Error contents Description/Action Possible repair actions Deflector gate transition to output option not detected Applies to: StapleSmart finisher The sensor (deflector gate HP) does not detect transition of the deflector gate to the output option. 1. Check all the connections on the output option controller card. 2. Check the sensor (deflector HP) for damage and replace if needed. Go to "SFP stapler assembly sensor (deflector HP) removal" on page 4-190. 3. Replace the output option if problem remains. 28x.49 x = bin number Deflector gate transition to standard bin not detected Applies to: StapleSmart finisher The sensor (deflector gate HP) does not detect transition of the deflector gate to the standard bin. 1. Check all the connections on the output option controller card. 2. Check the sensor (deflector HP) for damage and replace if needed. Go to "SFP stapler assembly sensor (deflector HP) removal" on page 4-190. 3. Replace the output option if problem remains. 28x.50 x = bin number Left tamper home position jam Applies to: StapleSmart finisher The left tamper home position is not detected by the sensor (left tamper HP) 1. Check all the connections on the output option controller card. 2. Check the tamper drive belt for damage and replace if needed. 3. Replace the left tamper motor assembly. Go to "SFP stapler assembly tamper drive motor assembly removal" on page 4-180. 4. Replace the sensor (tamper HP). Go to "SFP stapler assembly sensor (tamper HP left and right) removal" on page 4-187. 4. Replace the output option if problem remains. 2-78 Service Manual