Lexmark T652 Service Manual - Page 63
Lexmark T652 Manual
View all Lexmark T652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
4062 Error code or message 202.63 Error contents Description/Action Possible repair actions Sensor (fuser output) static jam and Sensor (narrow media) static jam Type 1 fuser Fuser page count has exceeded life. Media remains on the sensor (fuser output) and the sensor (narrow media) during the warm up sequence. 1. Go to sensor (fuser output) static jam service check. See "Sensor (fuser output) static jam service check" on page 2-138. 2. Go to sensor (narrow media) static jam service check. See "Sensor (narrow media) static jam service check" on page 2-140. 1. Remove all media present in media path. 2. Check media for proper installation. 3. Check for obstructions in media path. 4. Go to sensor (fuser output) service check. See "Sensor (fuser output) service check" on page 2-126. 5. Go to sensor (narrow media) service check. See "Sensor (narrow media) service check" on page 2-127. Go to sensor (fuser output) lingering jam service check. See "Sensor (fuser output) lingering jam service check." on page 2-137. 202.75 Paper jam around fuser exit or redrive area. Type 2 fuser Fuser page count has exceeded life. Page may be jammed in fuser exit or redrive area. 202.76 Sensor (fuser output) lingering jam. Destination is standard bin. Type 2 fuser Fuser page count has exceeded life. Media reached the sensor (fuser output) but did not clear it in the specified time. and Media did not reach the sensor (narrow media) 202.77 Sensor (fuser output) lingering jam. Type 2 fuser Fuser page count has exceeded life. Media reached the sensor (fuser output) but did not clear it in the specified time. Go to sensor (fuser output) lingering jam service check. See "Sensor (fuser output) lingering jam service check." on page 2-137. 1. Go to sensor (fuser output) static jam service check. See "Sensor (fuser output) static jam service check" on page 2-138. 2. Go to sensor (narrow media) static jam service check. See "Sensor (narrow media) static jam service check" on page 2-140. Go to sensor (fuser output) service check. See "Sensor (fuser output) service check" on page 2-126. 202.78 Sensor (narrow media) static jam Type 2 fuser Fuser page count has exceeded life. Media remains on the sensor (narrow media) during the warm up sequence. 202.79 Sensor (fuser output) bounce Type 2 fuser Fuser page count has exceeded life. The sensor (fuser output) rebounded once the trailing edge of the media passed. Diagnostic information 2-29