Lexmark T652 Service Manual - Page 133

4062 Error code or message 922.53 Error contents Description/Action Possible repair actions Fuser warm-up failure Fuser type = 1 Fuser page count has exceeded life. The fuser hot roll does reach the "final lamp detection" parameter but not in the specified time. The fuser hot roll has timed out and not reached "final lamp detection" during the specified time. The fuser hot roll did not reach operating temperature within new enhanced control. Replace the fuser unit assembly if problem remains. Go to "Fuser unit assembly removal (T650, T652, T654)" on page 4-23. Replace the fuser unit assembly if problem remains. Go to "Fuser unit assembly removal (T650, T652, T654)" on page 4-23. Replace the fuser unit assembly if problem remains. Go to "Fuser unit assembly removal (T650, T652, T654)" on page 4-23. Replace the fuser unit assembly if problem remains. Go to "Fuser unit assembly removal (T650, T652, T654)" on page 4-23. Replace the fuser unit assembly if problem remains. Go to "Fuser unit assembly removal (T650, T652, T654)" on page 4-23. Replace the fuser unit assembly if problem remains. Go to "Fuser unit assembly removal (T650, T652, T654)" on page 4-23. Replace the fuser unit assembly if problem remains. Go to "Fuser unit assembly removal (T650, T652, T654)" on page 4-23. Replace the fuser unit assembly if problem remains. Go to "Fuser unit assembly removal (T650, T652, T654)" on page 4-23. Replace the fuser unit assembly if problem remains. Go to "Fuser unit assembly removal (T650, T652, T654)" on page 4-23. Replace the fuser unit assembly if problem remains. Go to "Fuser unit assembly removal (T650, T652, T654)" on page 4-23. 922.54 Fuser warm-up failure Fuser type = 1 Fuser page count has exceeded life. 922.56 Fuser warm-up failure Fuser type = 1 Fuser page count has exceeded life. 922.57 Fuser warm-up failure Fuser type = 1 Fuser page count has exceeded life. The fuser hot roll does not reach operating temperature after increasing interpage gap. 922.75 Fuser warm-up failure Fuser type = 2 Fuser page count has exceeded life. The fuser hot roll failed to reach target temperature. 922.77 Fuser warm-up failure Fuser type = 2 Fuser page count has exceeded life. The fuser hot roll does not reach the "beginning lamp detection" parameter in the specified time. The fuser hot roll does reach the "final lamp detection" parameter but not in the specified time. The fuser hot roll has timed out and not reached "final lamp detection" during the specified time. The fuser hot roll did not reach operating temperature within new enhanced control. 922.78 Fuser warm-up failure Fuser type = 2 Fuser page count has exceeded life. 922.79 Fuser warm-up failure Fuser type = 2 Fuser page count has exceeded life. 922.81 Fuser warm-up failure Fuser type = 2 Fuser page count has exceeded life. 922.82 Fuser warm-up failure Fuser type = 2 Fuser page count has exceeded life. The fuser hot roll does not reach operating temperature after increasing interpage gap. Diagnostic information 2-99