Lexmark T652 Service Manual - Page 87

4062 Error code or message 243.52 Error contents Description/Action Possible repair actions HCIT tray lift motor overrun failure Source = Tray 3 The HCIT tray lift motor continues to detect pulses after the motor has turned off. 1. Ensure the HCIT media tray assembly is properly inserted into the machine. 2. Check the HCIT tray lift motor assembly for binding or damage. 3. Replace the HCIT tray lift drive motor assembly if problem remains. Go to "High capacity input tray (HCIT) tray lift drive motor assembly removal" on page 4-125. 243.65 Pick motor load error Source = Media tray 3 The pick motor has failed or caused high mechanical load due to paper jam or bind. 1. Remove all media present in media path. 2. Ensure media tray is not overfilled. 3. Check, clean or replace the pick rolls for wear and excess contamination. Go to "Pick roll assembly removal (T650, T652, T654)" on page 4-57. 4. Check all connections on the pick arm assembly. 5. Check all connections on the system card assembly. 6. Replace the pick arm assembly if problem remains. Go to "Operator panel door assembly removal (models X651, X652, X654, and X656)" on page 4-49. 7. Replace system card assembly if problem remains. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. Diagnostic information 2-53