Lexmark T652 Service Manual - Page 117
Lexmark T652 Manual
View all Lexmark T652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
4062 Error code or message 28x.71 x = bin number Error contents Description/Action Possible repair actions Deflector gate transition to standard bin not detected Applies to: StapleSmart finisher The sensor (deflector gate HP) does not detect transition of the deflector gate to the standard bin. 1. Check all the connections on the output option controller card. 2. Check the sensor (deflector HP) for damage and replace if needed. Go to "SFP stapler assembly sensor (deflector HP) removal" on page 4-190. 3. Replace the output option if problem remains. 281.72 x = bin number Sensor (media in stapler) static jam Applies to: StapleSmart finisher Media remains on the sensor (media in stapler) during the warm up sequence. 1. Inspect the sensor (media in stapler) for proper installation and reinstall if needed. 2. Replace the sensor (media in stapler) Go to "SFP stapler assembly sensor (media in stapler) removal" on page 4-189. 900.xx System software error Code detected unusual event or timing. 1. POR the machine and print a simple test page to determine if the problem is system software related, or if the customer is sending a corrupted print job. 2. Check all connections on the system card assembly. 3. Replace the system card assembly if problem remains. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. 1. POR the machine and print a simple test page to determine if the problem is firmware related, or if the customer is sending a corrupted print job. 2. Check all connections on the system card assembly. 3. Replace the system card assembly if problem remains. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. 901xx System software error Code detected unusual event or timing. Diagnostic information 2-83