Lexmark T652 Service Manual - Page 41

4062 Error code or message 44.26 Error contents Description/Action Possible repair actions RFID Error Based on tag location parameters: tag is not compatible with printer Unsupported SA Code Invalid Power setting Unsupported Feature Generic run-time reader error Reader response timeout Garbled or short response from reader 44.27 44.28 44.29 44.31 44.32 44.33 RFID Error RFID Error RFID Error RFID Error RFID Error RFID Error 1. These error codes most likely indicate a problem with the customer's datastream, and not the RFID Option itself. Ensure there is nothing wrong with the customer's datastream. 2. Check the RFID firmware card, RFID interface card, RFID cable, and RFID option for correct installation. Go to "High capacity input tray (HCIT) pick arm bracket assembly removal" on page 4-130. 3. Replace the RFID UHF option. 44.34 RFID Error Read/Verify operation failed (tag data from reader != expected value) 1. Retest using new RFID media 2. Check the RFID firmware card, RFID interface card, RFID cable, and RFID option for correct installation. Go to "High capacity input tray (HCIT) pick arm bracket assembly removal" on page 4-130. 3. Replace the RFID UHF option. 1. Check the RFID firmware card, RFID interface card, RFID cable, and RFID option for correct installation. Go to "High capacity input tray (HCIT) pick arm bracket assembly removal" on page 4-130. 2. Replace the RFID UHF option. 44.35 RFID Error Invalid RFID region Diagnostic information 2-7