Lexmark T652 Service Manual - Page 105
Lexmark T652 Manual
View all Lexmark T652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
4062 Error code or message 27x.50 x = bin number Error contents Description/Action Possible repair actions Sensor (output pass through) lingering jam Applies to: Mailbox The media reached the sensor (output pass through) but did not clear it in the specified time. See "Sensor (output pass through) lingering jam service check" on page 2-151. 27x.50 x = bin number Left tamper does not leave home position failure Applies to: Offset stacker The sensor (left tamper HP) does not detect that the tamper has moved from home position. 1. Check all the connections on the output option controller card. 2. Check the tamper drive belt for damage and replace if needed. 3. Replace the left tamper motor assembly. Go to "SFP stapler assembly tamper drive motor assembly removal" on page 4-180. 4. Replace the sensor (tamper HP). Go to "SFP stapler assembly sensor (tamper HP left and right) removal" on page 4-187. 4. Replace the output option if problem remains. 27x.51 x = bin number Sensor (output pass through) late jam Applies to: Mailbox The media is late reaching the sensor (output pass through) within the specified time. See "Sensor (output pass through) late jam service check" on page 2-150 27x.51 x = bin number Right tamper does not leave home position failure Applies to: Offset stacker The sensor (right tamper HP) does not detect that the tamper has moved from home position. 1. Check all the connections on the output option controller card. 2. Check the tamper drive belt for damage and replace if needed. 3. Replace the right tamper motor assembly. Go to "SFP stapler assembly tamper drive motor assembly removal" on page 4-180. 4. Replace the sensor (tamper HP). Go to "SFP stapler assembly sensor (tamper HP left and right) removal" on page 4-187. 4. Replace the output option if problem remains. 271.52 x = bin number Sensor (mailbox empty) lingering jam Applies to: Mailbox The media reached the sensor (mailbox empty) but did not clear it in the specified time. See "Sensor (mailbox empty) lingering jam service check" on page 2-154. Diagnostic information 2-71