Lexmark T652 Service Manual - Page 279

4062-XXX Paper size Other Envelope Dimensions 98 x 162 mm (3.9 x 6.4 in.) to 176 x 250 mm (6.9 x 9.8 in.) 250-or 550-sheet trays (standard or optional Optional 2000-sheet tray Multipurpose feeder x Duplex unit 1 This size appears in the Paper Size menu only when the paper source does not support size sensing or when size sensing is turned off. 2 3 4 Only the standard exit bin supports this size. This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software application. To support duplexing, the Universal width must be between 148 mm (5.8 in) and 216 mm (8.5 in); Universal length must be between 182 mm (7.2 in) and 356 mm (14 in). Registration Aligner assembly Sensor (input) Sensor (input) The sensor (input) is located just before the print cartridge and can detect whether media exists in the input path. Aligner assembly The aligner assembly is used to feed the media through the input path and to ensure that media is fed through the machine in a perfectly straight manner and not in a skewed manner. The aligner assembly can be adjusted to correct media skew issues and should always be adjusted when it is replaced. Diagnostic aids 3-67