Lexmark T652 Service Manual - Page 194

4062 Blank print (no print) Check the media path for foreign objects such as staples, clips, scraps of media. Step 1 Check Check the media condition. Load new, dry, recommended media, and perform a print test. Is the image density normal? Yes Problem solved. No Go to step 2. 2 3 Check the toner level. Is the toner level normal? Check the transfer roll assembly for proper installation? Is the above component properly installed? Go to step 3. Replace the print cartridge. Reinstall the transfer roll assembly. Replace the left and or right transfer roll brackets. Go to "Printhead assembly removal (T650)" on page 4-60 or "Printhead assembly removal (T652, T654)" on page 4-61. Go to step 4. 4 Check the left and right transfer roll bracket. Are the above components free from damage? Go to step 5. 5 Check the transfer roll assembly for contamination and wear. Is the above component free of excess wear and contamination? Go to step 6. Replace the transfer roll assembly. Go to "Transfer roll assembly removal (T650, T652, T654)" on page 4-78. 6 Check the print cartridge for proper installation. Is the print cartridge properly installed? Go to step 7. Inspect, clean and reinstall replace the print cartridge. 2-160 Service Manual