Lexmark T652 Service Manual - Page 46

4062 Error code or message 59 Error contents Description/Action Possible repair actions Incompatible Output Bin [x] An incompatible output bin is installed. For Output Bin x, x=1, 2, or 3. Remove the incompatible output bin and press to clear the message. Note: If the user installed the incompatible device to satisfy a Check Device Connections/ reattach message, the user should reinstall an associated compatible option or hot unplug the option. An incompatible tray is installed. For Tray x, x= 2, 3, 4, or 5. Remove the incompatible tray and press to clear the message. Note: If the user installed the incompatible device to satisfy a Check Device Connections/ reattach message, the user should reinstall an associated compatible option or hot unplug the option. This error code displays when the printer detects a defective disk. This error may occur at power on or during disk format and write operations. While this message displays. This error code displays when there is not enough free space on the disk to hold the resources that have been requested to be written to the disk. This message displays for both resource and PostScript Disk operators when the disk is full. The operator panel displays this message at each 300K page count interval. It is necessary to replace the fuser assembly, transfer roller, charge roll, and pick rolls at this interval to maintain the print quality and reliability of the printer. The parts are available as a maintenance kit. For more information, go to "Scheduled maintenance" on page 6-2. 1. Turn off and unplug the printer. 2. Remove the incompatible output option. 3. Plug in the printer, and turn it on. 59 Incompatible Tray [x] 1. Turn off and unplug the printer. 2. Remove the incompatible trays. 3. Plug in the printer, and turn it on. 61 Defective Disk press to clear the message. The disk is marked defective and normal printer operations continue. Disk operations are not allowed with a defective disk. The Format Disk menu is not shown. TBD 62 Disk Full 80 Routine Maintenance Needed Scheduled maintenance required. Refer to chapter 6. Go to "Preventive maintenance" on page 6-1. 2-12 Service Manual