Lexmark T652 Service Manual - Page 78
Lexmark T652 Manual
View all Lexmark T652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
4062 Error code or message 241.16 Error contents Description/Action Possible repair actions Sensor (input) late jam Source = Tray 1 The media is late reaching the sensor (input) within the specified time. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-129. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-129. 1. Remove all media present in media path. 2. Ensure media tray is not overfilled. 3. Check all connections on the pick arm assembly. 4. Check all connections on the system card assembly. 5. Replace the pick arm assembly if problem remains. Go to "Operator panel door assembly removal (models X651, X652, X654, and X656)" on page 4-49. 6. Replace system card assembly if problem remains. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. 1. Check all connections on the pick arm assembly. 2. Check all connections on the system card assembly. 3. Replace the pick arm assembly if problem remains. Go to "Operator panel door assembly removal (models X651, X652, X654, and X656)" on page 4-49. 1. Remove all media present in media path. 2. Check media for proper installation. 3. Check for obstructions in media path. Go to sensor (pass through) late jam service check. See "Sensor (pass through) late jam service check" on page 2-145. 241.18 Sensor (input) late jam Source = Tray 1 The media is late reaching the sensor (input) within the specified time. 241.19 Pick motor control failure. Source = Tray 1 The pick motor does not reach the proper operating speed at the specified time. 241.20 Tray 1 pick motor lost encoder failure Source = Tray 1 The pick motor is not reporting pulses back to the engine. 242.00 Media tray 2 area jam Source = Tray 2 The media is jammed in the media tray 2 area. 242.02 Sensor (pass through) late jam Source = Tray 2 The media is late reaching the sensor (pass through) within the specified time. 2-44 Service Manual