Lexmark T652 Service Manual - Page 185

4062 Step Check Check the above sensor for proper connection. Is the above sensor connected properly? Yes Replace the sensor (output pass through). Go to "High capacity stacker sensor (pass through) removal" on page 4-144. Go to "5-bin mailbox sensor (pass through) removal" on page 4-90. Go to "Output expander sensor (pass through) removal" on page 4-169. No Replace the connection. 4 5 Perform a print test using the output option. Does the error continue? Replace the output option. Problem solved. Sensor (output pass through) lingering jam service check Step 1 Check Check the output option for proper installation. Is the above component properly installed? Yes Go to step 2. No Remove then reinstall the output option Remove obstructions. Go to step 4. 2 Check for obstructions in the media path between the Sensor (output pass through) machine and the media bin. Is the media path free from obstructions? Check the sensor (output pass through) for proper operation. 1. Enter the diagnostic mode 2. Select Output bin tests 3. Select Sensor test 4. Select Output bin x 5. Observe the line item "passthru" Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked. Go to step 3. 3 Go to step 5. Diagnostic information 2-151