Lexmark T652 Service Manual - Page 43

4062 Error code or message 52 Error contents Description/Action Possible repair actions Flash Full This message displays when the printer detects an unformatted flash at power on. Press to clear the message. The flash is marked as bad and normal operation continues. Flash operations are not allowed until the flash is formatted. Go to network service check. See "Network service check" on page 2-177. 54 Serial Option [x] Error This IR is displayed when a serial error (framing, parity or overrun) has been detected on the specified optional serial port. This usually indicates that the serial port has not been set up correctly. Once a host interface error has been displayed for the first time, reporting of further host interface errors for the associated port is suppressed until the interface parameters are changed for the associated, or the machine is powered off. 54 Std Network Software Error This error displays when a network port is detected, but the printer cannot establish communications with it. The following actions may be taken: • Press to clear the message and continue printing. The job may not print correctly. • Program new firmware for the network interface. Reset the printer. The following actions may be taken: • Press to clear the message and continue printing. The job may not print correctly. • Program new firmware for the network interface. • Reset the printer. Remove unsupported option. 54 Network [x] Software Error This error displays when a network port is detected, but the printer cannot establish communications with it. 55 Unsupported Option in Slot [x] An unsupported option is installed in the specified solutions port. Power off the printer and remove the unsupported option in the specified slot. This error displays when data is sent to the printer across an optional parallel port, but the port has been disabled. Once this message displays, reporting of further errors is suppressed until the menus are entered, or the printer is reset. 56 Parallel Port [x] Disabled Go to network service check. See "Network service check" on page 2-177. Diagnostic information 2-9