Lexmark T652 Service Manual - Page 89
Lexmark T652 Manual
View all Lexmark T652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
4062 Error code or message 243.68 Error contents Description/Action Possible repair actions Pick motor stop error Source = Media tray 3 Pick motor stop error detected by options tray x 1. Remove all media present in media path. 2. Ensure media tray is not overfilled. 3. Check all connections on the pick arm assembly. 4. Check all connections on the system card assembly. 5. Replace the pick arm assembly if problem remains. Go to "Operator panel door assembly removal (models X651, X652, X654, and X656)" on page 4-49. 6. Replace system card assembly if problem remains. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. 1. Remove all media present in media path. 2. Ensure media tray is not overfilled. 3. Check all connections on the pick arm assembly. 4. Check all connections on the system card assembly. 5. Replace the pick arm assembly if problem remains. Go to "Operator panel door assembly removal (models X651, X652, X654, and X656)" on page 4-49. 6. Replace system card assembly if problem remains. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. 1. Remove all media present in media path. 2. Check media for proper installation. 3. Check for obstructions in media path. Go to sensor (pass through) late jam service check. See "Sensor (pass through) late jam service check" on page 2-145. Go to sensor (pass through) late jam service check. See "Sensor (pass through) late jam service check" on page 2-145. 243.69 Pick motor control failure. Source = Media tray 3 The pick motor does not reach the proper operating speed at the specified time. 244.00 Media tray 4 area jam The media is jammed in the media tray 4 area. 244.02 Sensor (pass through) late jam Source = Tray 4 The media is late reaching the sensor (pass through) within the specified time. 244.03 Sensor (pass through) late jam Source = Tray 4 The media is late reaching the sensor (pass through) within the specified time. Diagnostic information 2-55