Lexmark T652 Service Manual - Page 77
Lexmark T652 Manual
View all Lexmark T652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
4062 Error code or message 241.08 Error contents Description/Action Possible repair actions Pick motor load error Source = Media tray 1 The pick motor has failed or caused high mechanical load due to paper jam or bind. 1. Remove all media present in media path. 2. Ensure media tray is not overfilled. 3. Check, clean or replace the pick rolls for wear and excess contamination. Go to "Pick roll assembly removal (T650, T652, T654)" on page 4-57. 4. Check all connections on the pick arm assembly. 5. Check all connections on the system card assembly. 6. Replace the pick arm assembly if problem remains. Go to "Operator panel door assembly removal (models X651, X652, X654, and X656)" on page 4-49. 7. Replace system card assembly if problem remains. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-129. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-129. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-129. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-129. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-129. 241.10 Sensor (input) late jam Source = Tray 1 The media is late reaching the sensor (input) within the specified time. 241.11 Sensor (input) late jam Source = Tray 1 The media is late reaching the sensor (input) within the specified time. 241.12 Sensor (input) late jam Source = Tray 1 or envelope feeder The media is late reaching the sensor (input) within the specified time. 241.14 Sensor (input) late jam Source = Tray 1 or envelope feeder The media is late reaching the sensor (input) within the specified time. 241.15 Sensor (input) late jam Source = Tray 1 or envelope feeder The media is late reaching the sensor (input) within the specified time. Diagnostic information 2-43