Lexmark T652 Service Manual - Page 239

4062-XXX To print the Event Log, select Reports from CONFIG MENU, and then Event Log. The message Printing EVENT LOG is displayed. The event log provides a history of printer errors. The event log can only be printed in CONFIG MENU. SIZE SENSING This setting controls whether the printer automatically registers the size of paper installed in an input source with size sensing. Paper source Tray 1 (integrated) Multipurpose feeder 250-sheet drawer 550-sheet drawer High Capacity Feeder Envelope feeder When the setting is Auto, every input option equipped with size sensing hardware automatically registers what size media it contains. When the setting is Off, the media size detected by hardware is ignored. The media size can be set by the operator panel or the data stream. To change the size sensing setting: 1. Select SIZE SENSING from the Configuration menu. 2. Select Auto or Off, and press Press Back to exit. X X X Size sensing X . Panel Menus Settings are Disable and Enable. The default is Enable. PPDS Emulation This menu item allows the user to enable or disable PPDS emulation data stream. When this setting is enabled, the following settings are also changed: • SmartSwitch settings for each port are turned off. • The printer language is changed to PPDS Emulation. Users can still switch languages on the operator panel and through the PJL data stream. Demo Mode There is a built-in demonstration mode. The settings allow you to Deactivate to turn off the demo mode and Activate to turn it on. While Demo Mode is set, the printer will start in Demo Mode until you change the setting. WARNING: While Demo Mode is set to Activate, only demonstration files can print, and files received across the network or from the host computer are ignored. Diagnostic aids 3-27