Lexmark T652 Service Manual - Page 153

4062 Error code or message 982.01 Error contents Description/Action Possible repair actions Communication failure Paper port communication device detected a validation failure. Replace the system card assembly. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. Replace the system card assembly. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. Replace the system card assembly. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. 1. Turn the main power off. 2. Remove and reinstall the output option. 3. Turn the main power back on. 4. Check all output option interface connections if problem remains. 982.02 Communication failure Paper port communication device detected a framing error or the receive buffer overflowed. 982.03 Communication failure Paper port communication device timed out during communication. 982.04 Output option communication failure. An output option was not fully seated onto the printer or has been removed while the main power is turned on. 982.06 Paperport failure Paper port priortizer error. Option device message was not read by the priortizer. Replace the system card assembly. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. Remove the appropriate input or output options. Replace the system card assembly. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. Replace the system card assembly. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. 982.07 Too many options installed Paperport failure Exceeded the maximum number of input or output options. Command response error on the paper port. Response is too large for the communications buffer. 982.11 982.12 Paperport failure Bad bottom trunk on the paper port. 982.13 Hot plug failure The printer has detected a hot plug of an optional device. Low-level error on paper port. Power the machine off/on after all options are installed. Diagnostic information 2-119