Lexmark T652 Service Manual - Page 57

4062 Error code or message 201.78 Error contents Description/Action Possible repair actions Image data did not start in time Type 2 fuser Fuser page count has exceeded life Printhead write failure 1. Check all connections on the printhead assembly 2. Check all connections on the system card assembly. 3. Replace the printhead assembly if problem remains. 4. Replace the system card assembly if problem remains. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. 201.79 Sensor (narrow media) late jam Type 2 fuser Fuser page count has exceeded life The media is late reaching the sensor (narrow media) within the specified time. Go to sensor (narrow media) late jam service check. See "Sensor (narrow media) late jam service check." on page 2-139. 1. Remove all media present in media path. 2. Ensure that the operator panel door assembly is fully open then fully closed. 3. Check operator panel door assembly for damage. 4. Check interlock switch (in left operator panel hinge) for damage. 5. Check all connections on the system card assembly. Go to sensor (narrow media) late jam service check. See "Sensor (narrow media) late jam service check." on page 2-139. Go to sensor (fuser output) late jam service check. See "Sensor (fuser output) late jam service check." on page 2-135. 201.80 Operator panel door assembly interlock switch open failure Type 2 fuser Fuser page count has exceeded life The printer detected that the switch (operator panel door interlock) did not cycle prior to printer restart. 201.81 Sensor (narrow media) late jam Type 2 fuser Fuser page count has exceeded life. The media is late reaching the sensor (narrow media) within the specified time. 201.82 Sensor (fuser output) late jam Type 2 fuser Fuser page count has exceeded life The media is late reaching the sensor (fuser output) within the specified time. Diagnostic information 2-23