Lexmark T652 Service Manual - Page 240

4062-XXX Factory Defaults This setting enables a user to restore all the printer settings to the original factory settings. Selections are Restore Base and Restore Network. Network does not appear unless you have a network printer. The following settings are not changed: • Display language • Settings in the NETWORK/PORTS MENU group. LES Applications This disables all installed Lexmark Embedded Solution applications. Settings are Disable and Enable. The default is Enable. Energy Conserve This menu controls what values appear on the Power Saver menu. If Off is selected in Energy Conserve menu, then Disabled appears in the Power Saver menu and Power Saver can be turned off. If On is set in Energy Conserve, the Power Saver feature cannot be disabled. Paper Prompts When a tray is out of the indicated paper size, a prompt is sent to the user to load paper in a tray. This setting controls the tray the user is directed to fill. Selections are Auto (default), MP Feeder, and Manual Paper. Env Prompts This setting controls the tray the user is directed to refill when specific envelope size is out. The selections are Auto (default), MP Feeder, Envelope Feeder, and Manual Env. Action for Prompts The three settings are Prompt user, Continue, or Use current. Make a setting change, and the press Submitting selection appears on the display. . Font Sharpening The settings range from 0 to 150. The default is 24. Make a setting change, and then press selection appears on the display. . Submitting Wiper Messages Settings are On and Off. The default is On. Make a setting change, and then press selection appears on the display. . Submitting Clear Custom Status No values exist for this operation. Pressing initiates this operation. Note: Executing this operation erases any strings that have been defined by the user for the default or alternate custom messages. 3-28 Service Manual