Lexmark T652 Service Manual - Page 264

4062-XXX 3. Touch Back to return to EVENT LOG. Note: An event log printed from the CONFIG MENU will not contain debug information or secondary codes for 900 service errors. However, the event log printed from DIAGNOSTICS mode does include this information. SIZE SENSING This setting controls whether the printer automatically registers the size of paper installed in an input source with size sensing. Paper source Tray 1 (integrated) Multipurpose feeder 250-sheet drawer 550-sheet drawer 2000-sheet drawer 250-sheet duplex 550-sheet duplex Envelope feeder When the setting is Auto, every input option equipped with size sensing hardware automatically registers what size media it contains. When the setting is Off, the media size detected by hardware is ignored. The media size can be set by the operator panel or the data stream. To change the size sensing setting: 1. Touch to select SIZE SENSING from the Configuration Menu. 2. The panel displays the setting's name in the header and [setting's current value] row. Touch or to change the setting. The selections are Auto and Off. 3. Touch Submit to save your change. Touch Back to exit without changing the value. X X X Size sensing X below the header Panel Menus To change the Panel Menus setting: 1. Touch to select Panel Menus from the Configuration Menu. 2. The panel displays the setting's name in the header and [setting's current value] below the header row. Touch or to change the setting. The selections are On and Off. The default is Enable. 3. Touch Submit to save your change. Touch Back to exit without changing the value. PPDS Emulation This menu item allows the user to enable or disable PPDS emulation data stream. When this setting is enabled, the following settings are also changed: • SmartSwitch settings for each port are turned off. • The printer language is changed to PPDS Emulation. Users can still switch languages on the operator panel and through the PJL data stream. 3-52 Service Manual