Lexmark T652 Service Manual - Page 154

4062 Error code or message 983.00 Error contents Description/Action Possible repair actions Communication failure Invalid command received by the paper port device. Replace the system card assembly. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. 984.00 Communication failure Invalid command parameter received by the paper port device. Replace the system card assembly. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. 1. Check the RFID firmware card, RFID interface card, RFID cable, and RFID option for correct installation. Go to "High capacity input tray (HCIT) pick arm bracket assembly removal" on page 4-130. 2. Replace the RFID UHF option. Note: There can be no other connectivity options installed on printers that have the RFID UHF option installed. If any connectivity option is installed (other than the RFID interface card), a 985.xx error will occur 1. Check the RFID firmware card, RFID interface card, RFID cable, and RFID option for correct installation. Go to "High capacity input tray (HCIT) pick arm bracket assembly removal" on page 4-130. 2. Replace the RFID UHF option. Note: There can be no other connectivity options installed on printers that have the RFID UHF option installed. If any connectivity option is installed (other than the RFID interface card), a 985.xx error will occur 985.01 Service engine RFID communications Generic hardware error 985.02 Service engine RFID communications Printer having problems communicating with radio 2-120 Service Manual