Lexmark T652 Service Manual - Page 42

4062 Error code or message 44.36 Error contents Description/Action Possible repair actions RFID Error Invalid X/Y Position 1. This error code most likely indicates a problem with the customer's datastream, and not the RFID Option itself. Ensure there is nothing wrong with the customer's datastream. 2. Check the RFID firmware card, RFID interface card, RFID cable, and RFID option for correct installation. Go to "High capacity input tray (HCIT) pick arm bracket assembly removal" on page 4-130. 3. Replace the RFID UHF option. Install a new toner cartridge that matches the correct regional specification. 42.XY Cartridge Region Mismatch This IR is displayed when the printer detects that the installed cartridge has a region that differs from the below options. To clear this IR, the printer cartridge must be replaced with one that has a proper region. X and Y can have the following values: 0 : Worldwide region or Undefined region 1 : America 2 : EMEA 3 : Asia 4 : Latin America 9 : Invalid region 50 PPDS Font Error This message displays when the PPDS interpreter has encountered a font error. Note: This error may only occur when the printer is formatting PPDS print data. The following actions may be taken: • Press to clear the message and continue processing the job. • Press until Busy/ Waiting appears. The following are available: - Cancel Job - Reset Printer - Reset Active Bin 51 Defective Flash This message displays when the printer detects a defective flash. This error may occur at power on, or during flash format and write operations. Press to clear the message. The flash is marked as bad and normal operation continues. Flash operations are not allowed until the problem is resolved. 2-8 Service Manual