Lexmark T652 Service Manual - Page 107
Lexmark T652 Manual
View all Lexmark T652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
4062 Error code or message 28x.30 x = bin number Error contents Description/Action Possible repair actions Page ID complete not clear Applies to: StapleSmart finisher A software failure has occurred with the output option. 1. Turn the machine off/on. 2. Replace the output option if problem remains. 28x.31 x = bin number Transport motor encoder not detected Applies to: StapleSmart finisher The output option transport motor encoder is not detected upon startup. 1. Check all connections on the output option controller card. 2. Replace the output option if problem remains. 1. Check all connections on the output option controller card. 2. Replace the output option if problem remains. 1. Check all connections on the output option controller card. 2. Replace the output option if problem remains. 28x.32 x = bin number Transport motor encoder not detected Applies to: StapleSmart finisher The transport motor encoder detection is lost during normal operation. 28x.33 x = bin number Transport motor overspeed failure Applies to: StapleSmart finisher The transport motor rotate at the specified speed 28x.34 x = bin number Transport motor underspeed failure Applies to: StapleSmart finisher The transport motor rotate at the specified speed 1. Check all connections on the output option controller card. 2. Replace the output option if problem remains. 28x.35 x = bin number Sensor (self priming) late failure Applies to: StapleSmart finisher The sensor (self priming) within the stapler assembly does not detect a ready staple in the specified time. 1. Check all the connections on the output option controller card and the stapler assembly. 2. Remove the staple cartridge and remove all jammed staples. If the cartridge is jammed and can not be removed, go to step 3. 3. Remove the stapler assembly. Go to "SFP stapler assembly stapler unit assembly removal" on page 4-182. 4. Manually rotate the drive gears and reset the stapler. Remove all jammed staples then reinstall the stapler assembly. 5. If problem remains, replace the stapler assembly. Go to "SFP stapler assembly stapler unit assembly removal" on page 4-182. Diagnostic information 2-73