Lexmark T652 Service Manual - Page 56
Lexmark T652 Manual
View all Lexmark T652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4062 Error code or message 201.55 Error contents Description/Action Possible repair actions Operator panel door assembly interlock switch open failure Type 1 fuser Fuser page count has exceeded life The printer detected that the switch (operator panel door interlock) did not cycle prior to printer restart. 1. Remove all media present in media path. 2. Ensure that the operator panel door assembly is fully open then fully closed. 3. Check operator panel door assembly for damage. 4. Check interlock switch (in left operator panel hinge) for damage. 5. Check all connections on the system card assembly. Go to sensor (narrow media) late jam service check. See "Sensor (narrow media) late jam service check." on page 2-139. Go to sensor (fuser output) late jam service check. See "Sensor (fuser output) late jam service check." on page 2-135. Go to sensor (fuser output) late jam service check. See "Sensor (fuser output) late jam service check." on page 2-135. 1. Remove all media present in media path. 2. Check all connections on the main drive motor assembly. 3. Check all connections on the system card assembly. 4. Replace the main drive motor assembly if problem remains. Go to "Output cover assembly removal (T650, T652, T654)" on page 4-54. Go to sensor (fuser output) late jam service check. See "Sensor (fuser output) late jam service check." on page 2-135. 201.56 Sensor (narrow media) late jam Type 1 fuser Fuser page count has exceeded life. The media is late reaching the sensor (narrow media) within the specified time. 201.57 Sensor (fuser output) late jam Type 1 fuser Fuser page count has exceeded life The media is late reaching the sensor (fuser output) within the specified time. 201.75 Sensor (fuser output) late jam Type 2 fuser Fuser page count has exceeded life. The media is late reaching the sensor (fuser output) within the specified time. 201.76 Main drive motor assembly load error. Type 2 fuser Fuser page count has exceeded life. The main drive motor assembly has failed or caused high mechanical load due to paper jam or bind. 201.77 Sensor (fuser output) late jam Type 2 fuser Fuser page count has exceeded life. The media is late reaching the sensor (fuser output) within the specified time. 2-22 Service Manual