Lexmark T652 Service Manual - Page 44

4062 Error code or message 56 Error contents Description/Action Possible repair actions Serial Port [x] Disabled This error displays when data is sent to the printer across an serial port, but the port has been disabled. Once this message displays, reporting of further errors is suppressed until the menus are entered, or the printer is reset. Displayed when status is requested over the USB port, but the port has been disabled. Once the error has been displayed for the first time, reporting of further errors is suppressed until the menus are entered or the printer is reset. Go to network service check. See "Network service check" on page 2-177. 56 Standard USB Port Disabled The following actions may be taken: • Press to clear the message. The printer discards any data received on the USB port. • Press until Busy/ Waiting appears. The following are available: - Reset Printer Reset Active Bin 56 USB Port [x] Disabled Displayed when status is requested over the USB port, but the port has been disabled. Once the error has been displayed for the first time, reporting of further errors is suppressed until the menus are entered or the printer is reset. The following actions may be taken: • Press to clear the message. The printer discards any data received on the USB port. • Press until Busy/ Waiting appears. The following are available: - Reset Printer Reset Active Bin 58 Invalid Tray Configuration Either no input trays or there are optional trays above the RFID option. 1. Ensure the RFID option is in first position under printer and that there is at least one input tray beneath the RFID option. 2. Check the RFID firmware card, RFID interface card, RFID cable, and RFID option for correct installation. Go to "High capacity input tray (HCIT) pick arm bracket assembly removal" on page 4-130. 3. Replace the RFID UHF option. 1. Turn off and unplug the printer. 2. Remove the excess bins. 3. Plug in the printer, and turn it on. 58 Too Many Bins Attached This error code displays when too many bins are attached to the printer. 2-10 Service Manual