Motorola i365 User Guide - Nextel - Page 209
Connecting to the Internet or a Network for the First Time, Testing the Connection
View all Motorola i365 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Data Services 8. Enter the user name and password for your Internet service and check the appropriate fields for connecting to your service provider (if applicable). Click Next and then Finish to complete the process. Connecting to the Internet or a Network for the First Time Before you use your phone to connect to the Internet or a network for the first time, you must disable LCP Extensions. 1. From Network Connections, select the dial-up connection you just created. 2. From the dial-up screen, click Properties. 3. From the Properties screen, click on the Networking tab, and click on Settings. 4. Remove the checkmark from Enable LCP Extensions, and click OK. You will then be returned to the dial-up screen and can now connect to the Internet or a network. Testing the Connection with HyperTerminal A connection test can be performed using HyperTerminal to determine if your computer and phone are communicating. 1. Open HyperTerminal by clicking Start and selecting Accessories > Communications > HyperTerminal. 2. When prompted, enter a name and select an icon for the connection you are creating, and click OK. 3. Click on Connect using and select the COM port your phone is installed on. Click OK. 4. Click on Bits per second, and select OK. 5. To determine if your computer is communicating with your phone, use the following commands: Ⅲ ATI1 - This command will show you the modem model. Ⅲ ATI2 - This command will show you the software version that is on the unit. Ⅲ ATI3 - This command will show you the build date of the unit. Section 3B. Data Services 197