Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 239

COPIER COPYING IN THE CENTER OF THE PAPER (Centering) This is used to center the copied image on the paper. This lets you place the image in the center of the paper when the original size is smaller than the paper size or when the image is reduced. Not using the centering function Using the centering function Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 1 Place the original in the automatic document feeder. ☞ PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER (page 1-37) After placing the original, specify the original size. ☞ ORIGINAL SIZES (page 2-29) Select the special modes. 2 (1) Touch the [Special Modes] key. (2) Touch the [Image Edit] key. ☞ [Image Edit] KEY (page 2-77) Special Modes Image Edit 3 Photo Repeat B/W Reverse (1) (2) OK OK Mirror Image Centering Select Centering. (1) Touch the [Centering] key so that it is highlighted. (2) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. Press the [START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 4 have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). 2-81 Contents