Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 71

BEFORE USING THE MACHINE TRAY SETTINGS FOR TRAY 1 TO 4 LOADING PAPER AND CHANGING THE PAPER SIZE A maximum of 500 sheets of paper from size 5-1/2" x 8-1/2" to size 8-1/2" x 14" (A5 to A4) can be loaded in trays 1 and 2. A maximum of 500 sheets of paper from size 7-1/4" x 10-1/2" to size 8-1/2" x 14" (B5 to A4) can be loaded in trays 3 and 4. Pull out the paper tray. Gently pull the tray out until it stops. To load paper, go to step 3. To load a different size of paper, go to the next step. 1 Do not pull hard on the tray. This may cause failure. Adjust the guide plates A and B by squeezing their lock levers and sliding A them to match the vertical and horizontal dimensions of the paper to be loaded. The guide plates A and B are slidable. Slide each guide plate B while squeezing its lock lever. 2 • Be sure to place the guide to match the size of the paper. If the guide is not placed correctly, paper skewing or misfeeds may occur. • The loaded paper should not go higher than these protrusions. Fan the paper. Fan the paper well before loading it. If the paper is not fanned, multiple sheets may feed at once and cause a misfeed. 3 When handling paper, take care not to cut yourself on the edges of the paper. 1-30 Contents