Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 769

SYSTEM SETTINGS Receiving Date & Time Print Enable this setting to have the date and time of reception printed. Select [Inside the Received Image] or [Outside the Received Image] for the position where the date and time is printed. When [Inside the Received Image] is selected, the date and time of reception is printed on the received image. When [Outside the Received Image] is selected, the received image is reduced and the date and time of reception is printed in the blank area that results. [Outside the Received Image] cannot be selected for the reception date and time print setting when "Auto Receive Reduce Setting" (page 7-112) is not enabled. Fax Output Settings These settings are used to select the number of copies for received faxes. Number of Prints Set the number of copies of received faxes that are printed to any number from 1 to 99. This setting can only be used when the [Multiple Set Print] checkbox is selected in "Fax Settings" (page 7-106). Allow/Reject Number Setting Use this setting to specify whether reception from a stored number is to be allowed or rejected. Item Description Reject Reception Reject reception from the stored number. Allow Reception Allow reception from the stored number. All Invalid Even if numbers have been stored, disregard the numbers and allow reception from all numbers. Add New Store a new number for which allow or reject will be specified (maximum of 50 numbers). Enter the number (maximum of 20 digits) and touch the [Store] key. Registration Number List A list of the stored numbers can be displayed. A number can be selected in this screen to delete it from the list. When no numbers have been stored for allow/reject specification, no keys other than [Add New] can be selected. Fax Polling Security The following settings are for regular polling memory using the Public Box. Set Fax Polling Security When the memory polling function is used, this setting determines whether any machine will be allowed to poll your machine, or only machines that have been stored in your machine. Add New When the Polling Security Setting is enabled, use this setting to store (or delete) the fax numbers of the machines that are allowed to poll your machine. The stored fax numbers are called passcode numbers. Up to 10 passcode numbers can be stored (maximum of 20 digits each). Passcode Number Key List This shows a list of the stored passcode numbers. A number can be selected to delete it. Note that these settings do not apply to F-code polling memory. 7-113 Contents