Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 529

SCANNER/INTERNET FAX SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE When the original is placed, the original size and the send size set in the system settings appear in the base screen as the original size and send size. Scan Internet Fax Address Book Original Address Entry Exposure Fax USB Mem. Scan PC Scan Scan: Auto 8½x11 Text Send: Auto Send Settings Resolution 200X200dpi Address Review File Format PDF PDF File Color Mode Mono2 Quick File Special Modes In the above screen, the scan size (the original size) is 8-1/2" x 11" (A4) and the send size is auto. For example, if the scan size is 8-1/2" x 11" (A4) and the send size is 5-1/2" x 8-1/2" (B5), the image will be reduced before transmission. "Scan Size" "Send Size" is set to 5-1/2" x 8-1/2" (B5) Transmission 8-1/2" x 11" (A4) The image is reduced to 5-1/2" x 8-1/2" (B5) before transmission If the size of the placed original is different from the displayed original size, specify the original size. ☞ Specifying the original scan size (by paper size) (page 5-57) ☞ Specifying the original scan size (by numerical values) (page 5-59) • System Settings (Administrator): Default Original Size Settings Set this if you frequently use a particular original size. The set size will appear in the [Original] key. When this setting is configured, changing the original size can be omitted. • System settings (Administrator): Setting of Default Original Exit Place (MX-B402SC Only) When the automatic document feeder is used, the original's default output destination can be set to the upper exit or the heavy exit. (Except when "Size Input" or "Card Size" is selected for the original size.) 5-56 Contents