Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 730

Auto Selection of Paper Tray that was Last Loaded When this setting is enabled and the machine is on standby in copy mode, the last paper tray that was loaded with paper automatically becomes the default paper tray for copy mode, until the machine is reset. 600dpi x 600dpi Scanning Mode for Document Feeder This is used to change the scanning resolution for copying using the automatic document feeder from 600 x 300 dpi to 600 x 600 dpi (high quality mode). When high quality mode is used, fine print and thin lines are reproduced with greater clarity, however, the scanning speed is slower. When high quality mode is not selected, the following conditions must be satisfied in order to scan at 600 x 300 dpi and attain the fastest speed. • The copy ratio must be set to 100%. • Do not select a special mode that will change the ratio. Quick Scan from Document Glass This is used to change the scanning resolution for copying using the document glass from 600 x 600 dpi to 600 x 300 dpi (speed priority mode). When high speed mode is selected, the first copy time is quicker, however, the copy image is not as clear. When high speed mode is selected, the following conditions must be satisfied in order to scan at 600 x 300 dpi and attain the fastest speed. • The copy ratio must be set to 100%. • Do not select a special mode that will change the ratio. SYSTEM SETTINGS 7-74 Contents