Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 390
Specifying The Scan Size And Send Size
View all Sharp MX-B402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 390 highlights
FACSIMILE SPECIFYING THE SCAN SIZE AND SEND SIZE When the original is placed, the original size and the send size set in the system settings appear in the base screen as the original size and send size. Scan Internet Fax Fax USB Mem. Scan PC Scan Address Book Original Scan: 8½x11 Send: Auto Direct TX Exposure Auto Sub Address Resolution Standard Address Review Special Modes File Quick File Auto Reception Fax Memory:100% In the above screen, the scan size (the original size) is 8-1/2" x 11" (A4) and the send size is auto. If, for example, the scan size were 8-1/2" x 11" (A4) and the send size were 5-1/2" x 8-1/2" (B5), the image would be reduced before transmission. "Scan Size" Transmission "Send Size" is set to 5-1/2" x 8-1/2" (B5) 8-1/2" x 11" (A4) The image is reduced to 5-1/2" x 8-1/2" (B5) before transmission If the size of the placed original is different from the displayed original size, specify the original size. ☞ Specifying the original scan size (by paper size) (page 4-48) ☞ Specifying the original scan size (by numerical values) (page 4-51) • System Settings (Administrator): Default Original Size Settings Set this if you frequently use a particular original size. The set size will appear in the [Original] key. When this setting is configured, changing the original size can be omitted. • System settings (Administrator): Setting of Default Original Exit Place (MX-B402SC Only) When the automatic document feeder is used, the original's default output destination can be set to the upper exit or the heavy exit. (Except when "Size Input" or "Card Size" is selected for the original size.) 4-47 Contents