Brother International Entrepreneur Pro PR-1000 Users Manual - English - Page 100

OTHER BASIC PROCEDURES ■ Moving to the correct position If the center of the embroidery frame is at the needle drop point in the embroidering area, the embroidery frame is correctly positioned, in other words, at the starting position before embroidering. If the embroidery frame is changed, the next frame that is installed will not be correctly positioned. For example, if the extra-large embroidery frame is replaced with the small frame, the following will occur. • The embroidery frame is replaced while the embroidering settings screen or embroidering screen is displayed, and then the key for checking the embroidering area, for moving the embroidery frame, or for starting embroidering is touched. The embroidery frame will move. Since the embroidery frame is moved to the correct position and paused, touch the desired key again. If the pattern extends out of the embroidering area for the frame after the frame is moved, a message appears, indicating that the embroidery frame should be replaced. Either replace the embroidery frame or return to the pattern editing screen and adjust the pattern size or embroidering position. 1 Center of embroidery frame at the correct position 2 Needle position when the embroidery frame is replaced In order to correct the misalignment of this embroidery frame, the embroidery frame automatically moves to the correct position when any of the following are performed. • The embroidery machine is turned on. The embroidery frame will move. • The embroidering settings screen is displayed. The embroidery frame will not move if it is correctly positioned. If the pattern extends out of the embroidering area for the frame, a message appears, indicating that the embroidery frame should be replaced. Either replace the embroidery frame or return to the pattern editing screen and move the embroidering position. 98