Brother International Entrepreneur Pro PR-1000 Users Manual - English - Page 63

Pass the thread under the guide on the 3 presser foot. Press the automatic needle-threading 5 button. 1 Guide on presser foot 2 Notch in guide on presser foot • Make sure that the thread securely passes through the notch in the guide on the presser foot. Securely pass the thread through the groove 4 in the thread cutter, and then lightly pull the thread to cut it. 1 Groove in thread cutter Note ● If the thread is not correctly passed through the groove in the thread cutter, the message "Wiper error" appears and the needle cannot be threaded. Be sure to securely pass the thread through the groove. ● If enough thread is not pulled out, the thread cannot be pulled through the thread cutter. 2 • The threader moves back away from the needle. The thread is pulled through the needle eye. • The wiper comes out and catches the thread between the needle and the threader. • The threader goes back to the original home position. This completes the upper threading for needle bar 1. Thread the remaining needle bars in the same way. Note ● If the needle bar to be threaded is not moved to the embroidering position, the needle cannot be threaded with the automatic needle-threading mechanism. For the remaining needle bars, perform the following operation to move the needle bar to the embroidering position before trying to thread the needle. Upper Threading 61