Brother International Entrepreneur Pro PR-1000 Users Manual - English - Page 262

APPENDIX ■ Golf Style ■ Cap fabric not recommended for embroidering • Caps with a front panel that is less than 50 mm (2 inches) high (such as a sun visor) • Children's caps • Caps with a brim that is longer than 80 mm (3-1/16 inches) 1 Face: Not divided 2 5 sections Otto International, Inc. cap model number (Example) OTTO37-024 Mesh backing on the back of front panels (soft or hard) Constructed firm front Ease of framing (hooping) Fairly easy Backing 1 to 2 ply Memo ● Check if this area 1 is covered with mesh. Note ● There is no centerline that can be used as a guide for placing the cap in the cap frame. Before framing the cap, use a charcoal pen to mark the centerline. Fabric precautions ■ Cap fabric recommended for embroidering • 35%Cotton / 65%Polyester • 100%Cotton • 80%Wool / 20%Nylon • 15%Wool / 85%Acrylic ■ Cap fabric not recommended for embroidering If caps of the following types of fabric are used, they will be very difficult to frame, easily wrinkled, or easily shrink. • Polyester Foam • Stretch material • Melton Wool • 100%Nylon • Suede Preparing to use the cap frame ■ Installing the cap frame driver Touch → → → in order to view a video of the operation on the LCD (refer to page 232). Remove the embroidery frame holder from the carriage on the machine, and then install the cap frame driver. Before removing the embroidery frame holder, remove the embroidery frame. (Refer to "Removing the embroidery frame" on page 69.) CAUTION ● Before changing any embroidery frame holder, make sure your machine is turned off. 260