Brother International Entrepreneur Pro PR-1000 Users Manual - English - Page 268

APPENDIX Pull the mounting jig toward you, and then use the Phillips screwdriver to tighten the three screws (one each at the top, left and right sides). Attaching the cap frame Touch → → → in order to view a video of the operation on the LCD (refer to page 232). Put the cap into the cap frame attached to the mounting jig, and then remove the cap frame from the mounting jig with the cap clamped. Next, attach the cap frame to the cap frame driver on the machine. ■ Attaching the cap frame to the mounting jig and putting a cap into the frame Attach the cap frame to the mounting jig. 1 Slide the cap frame onto the mounting jig, making sure that the notch at the base of the brim holder on the cap frame is aligned with the guide plate on the top of the mounting jig. X This completes the preparation of the mounting jig. 1 Guide plate on mounting jig 2 Brim holder 3 Notch 266