Brother International Entrepreneur Pro PR-1000 Users Manual - English - Page 257

Check the size of the pattern, and then hoop 3 fabric that is large enough in the optional jumbo frame. * For details on attaching the optional jumbo frame, refer to "Hooping the Fabric" on page 94. Note ● When hooping the fabric, position it within the embroidery frame so there is at least 10 mm of space to the inside of the frame. Note ● When you change the embroidering position using the jumbo frame, be sure to be aware of the size of the combined pattern. You cannot change the position exceeding the embroidery area. 1 Embroidery area Touch , and then press the start/ 6 stop button to start embroidering the first section of the pattern. 1 more than 10 mm (3/8 inch) 2 Location where the pattern is to be embroidered Attach the jumbo frame to the machine. 4 After embroidering of the first section of the 7 pattern is finished, the following message appears. Touch . Touch . 5 7 Embroidery Patterns for the Optional Jumbo Frame 255