Brother International Entrepreneur Pro PR-1000 Users Manual - English - Page 232

BASIC SETTINGS AND HELP FEATURE Specifying the spool stand LED setting The spool stand LED lights inform you when the machine stops, when the thread need to be changed or error has occurred. Set the spool stand LED setting to "OFF", "1" or "2". The spool stand LED setting can be specified from page 4/5 of the settings screen. Touch or 1 setting. to select the desired Specifying thread sensor If thread sensor is set to "OFF", the machine does not stop until embroidering is finished, even if the thread breaks or there is no more thread in the bobbin. Set thread sensor to "ON", except when it is necessary to set it to "OFF". When the machine is purchased, "ON" is selected. The thread sensor can be specified from page 4/5 of the settings screen. Touch or 1 setting. to select the desired OFF Turns off the spool stand LED. 1 Spool stand LED turns on in the particular situations; when the machine starts sewing, thread changed, a sewing error occurs, etc. 2 Spool stand LED is always turned on; indi- cating the thread color and in the particular situation. ■ Spool stand LED indications indicates the spool that needs changing (Appropriate thread color is indicated. For black thread color, LED light turns off.) indicates the spool that activates thread breakage error OFF sewing error finished sewing Note ● Normally, set thread sensor to "ON". When thread sensor is set to "OFF", the machine will not be able to detect if the upper thread has become tangled. Continuing to use the machine with tangled thread may cause damage. 230