Brother International Entrepreneur Pro PR-1000 Users Manual - English - Page 263
Pass the machine bed through the ring of
View all Brother International Entrepreneur Pro PR-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 263 highlights
Loosen and then remove the two thumb 1 screws and the embroidery frame holder. Pass the machine bed through the ring of the 3 cap frame driver. 1 Thumb screws • The removed thumb screws remain attached to the embroidery frame holder. 1 Machine bed Note ● Be careful that the cap frame driver does not hit any nearby parts, such as the presser foot. Attach the cap frame driver to the carriage as described below in steps 4 through 7. 1 Put the two thumb screws back in the embroidery frame holder. Remove the two upper thumb screws of the 2 cap frame driver and set aside. Loosen the two lower thumb screws (4 turns). 1 Upper thumb screws 2 Lower thumb screws 7 Using the Optional Cap Frame 261
Using the Optional Cap Frame
261
7
—————————————————————————————————————————————————————————————————————————————————————
1
Loosen and then remove the two thumb
screws and the embroidery frame holder.
1
Thumb screws
• The removed thumb screws remain
attached to the embroidery frame holder.
1
Put the two thumb screws back in the
embroidery frame holder.
2
Remove the two upper thumb screws of the
cap frame driver and set aside. Loosen the
two lower thumb screws (4 turns).
1
Upper thumb screws
2
Lower thumb screws
3
Pass the machine bed through the ring of the
cap frame driver.
1
Machine bed
Note
●
Be careful that the cap frame driver does
not hit any nearby parts, such as the
presser foot.
Attach the cap frame driver to the carriage as
described below in steps
4
through
7
.