Brother International Entrepreneur Pro PR-1000 Users Manual - English - Page 227

Touch or 1 setting. The key appears as to select the desired when "ON" is selected, and it appears as when 1 "OFF" is selected. 2 3 1 Thumbnail Background colors 2 Selected color 3 Touch to return to the settings screen. Memo ● The setting remains selected even if the machine is turned off. Specifying jumpstitch trimming / "DST" jump codes for trimming You can specify whether or not jumpstitches are cut. In addition, when using Tajima embroidery data (.dst), you can specify whether or not the thread is cut according to the specified number of jump codes. ON: The machine cuts the upper and bobbin thread before the jumpstitch. When Tajima embroidery data (.dst) is used, the machine converts the "jump" code to a trim code, based on the number specified on the next line. OFF: The machine does not cut either a jumpstitch or the "jump" code in Tajima embroidery data (.dst). When the machine is purchased, "ON" is selected and the number of jumps is set to "3". The "DST" thread trim settings can be specified from page 2/5 of the settings screen. Note ● If the setting is changed from the previous setting, the new setting is only applied to the next embroidery. • Each touch of the key turns the setting either on or off. Note ● This setting is not applied to the trimming of threads between characters in alphabet patterns. (Refer to "Trimming the threads between characters" on page 189.) Memo ● The number of jump codes cannot be specified for data other than Tajima embroidery data (.dst). 6 Using the Settings Key 225