Brother International Entrepreneur Pro PR-1000 Users Manual - English - Page 300

APPENDIX Error messages If the start/stop button is pressed while the machine is not correctly set up or if an incorrect operation is performed, the machine stops and informs you of the error with a buzzer and an error message. If an error message appears, correct the problem according to the instructions in the message. To close the message, touch or perform the correct operation, then touch appears again, consult your nearest Brother dealer. . If the message Some malfunction occurred. There are too many characters in Machine cannot receive any data the curved text arrangement for from the PC in the Link mode. the selected embroidery frame. Turn off the machine, and check Change the text arrangement or the the USB connection. After connect embroidery frame. the USB cord securely, turn on the machine again. (Refer to page 176) When embroidering the pattern Machine failed to recognize the When in camera mode by for the optional jumbo frame, the embroidery positioning mark. machine failed to find the Confirm that the embroidery touching , some keys are positioning mark. positioning mark is in the selected unavailable. Follow the procedure from step 8 area. If problem persists, reposition on page 256, again. the mark. Touch to cancel the camera mode to activate the key. 298