Brother International Entrepreneur Pro PR-1000 Users Manual - English - Page 305

The built-in camera is being used The combined character pattern is The motor has locked up due to to align the embroidery position, too large to fit in the extra-large tangled thread or for other reasons but the embroidery positioning embroidery frame. related to thread delivery. sticker is too near an edge or the Change the character pattern If the thread is entangled in the pattern extends from the combination. bobbin case, clean the race, and embroidery frame. then oil it. (Refer to page 284 and Change the position of the 288.) embroidery positioning sticker, and then try aligning the position again. The USB media is write-protected. The USB media is write-protected. You tried to select a pattern after Cancel the write protection. Touch , and cancel the write the USB media in which the pattern is saved has been changed. protection. You tried to save a copyright- You tried to use an editing An unusable embroidery card is protected pattern to USB media or function while the pattern is not inserted. a computer. completely within the red outline. Remove the embroidery card. According to copyright laws, patterns that are illegal to Move the pattern so it is completely within the outline. 7 reproduce or edit cannot be saved to USB media or a computer. Save the pattern in the machine's memory. Troubleshooting 303