Brother International Entrepreneur Pro PR-1000 Users Manual - English - Page 82

EMBROIDERING TUTORIAL 1 6 2 3 7 4 8 5 Display No. Key Name Function While sewing embroidery, touch 1 this key for the Reserve Stop machine to stop key prior to the next color beginning. Page p.140 Enables the needle 2 bar settings to Temporary manually be p.142 needle bar specified. settings key Change the needle Switch spool bar settings from the 3 key screen without (Not available changing the thread p.108 in the "Manual spools on the Color machine. Sequence" mode) Touch this key to quit sewing and 4 return to the Return key embroidering settings screen. Unlocks the machine so it can start sewing within 5 10 seconds. When p.64 Unlock key this key is touched, the start/stop button flashes in green. Display No. Key Name Function Page Touch a key to move the needle bar position to the Needle bar key selected needle bar number. Use when threading the needle with the automatic needle-threading 6 mechanism. Shows the color and the thread color name (number) for Thread color the thread on the set up display needle bar indicated p.54 on the key. Thread the machine as indicated here. Moves the needle forward or backward through the stitching. Use this key in the following situations: ● If the thread breaks or runs out 7 Forward/ while embroidering p.115 Backward stitch key ● To restart sewing from the beginning ● To continue sewing after the machine was turned off Specifies the 8 Maximum maximum sewing sewing speed speed. key p.139 Memo ● The thread color numbers in the thread color sequence display and the thread color set up display can be changed, for example, to the color name or the thread color number for other brands. (Refer to "Changing the thread color information" on page 222.) 80