Brother International Entrepreneur Pro PR-1000 Users Manual - English - Page 94

OTHER BASIC PROCEDURES Embroidery type Quilt frame (optional) Embroidering area Usage 200 mm (H) × 200 mm (W) (7-7/8 inches (H) × 7-7/8 inches (W)) Use when embroidering pieces for quilts. Reference Consult your nearest Brother dealer. Embroidery frame holder B Border frame (optional) 100 mm (H) × 300 mm (W) (4 inches (H) × 11-3/4 inches (W)) Use when embroidering a long string of characters or patterns. Jumbo Frame (optional) 360 mm (H) × 360 (W) mm (14 inches (H) × 14 inches (W)) Use when embroidering combined patterns with a size less than 350 mm (H) × 200 mm (W) (13-3/4 inches (H) × 7-7/8 inches (W)) or patterns with a maximum size of 350 mm (H) × 350 mm(W) (13-3/4 inches (H) × 13-3/4 inches (W)). Refer to "Embroidery Patterns for the Optional Jumbo Frame" on page 254. Round frame (optional) ∅=diameter ∅100 mm (4 inches) ∅130 mm (5 inches) ∅160 mm (6 inches) Use when adding a built-in embroidery pattern to a sleeve. Select the frame appropriate for the size of the pattern. Consult your nearest Brother dealer. Cap frame wide type (optional) Cylinder frame (optional) 60 mm (H) × 360 mm (W) (2-3/8 inches (H) × 14 inches (W)) Use when embroidering caps. Baseball (golf) caps, tulip hats and bucket hats can be embroidered with these frames. These frames cannot be used with hats having a front area of 60 mm (2-3/8inches) or less, such as sun visors and children's hats. In addition, these cannot be used with hats that have a brim longer than 80 mm (3-1/8 inches). 80 mm (H) × 90 mm (W) (3 inches (H) × 3-1/2 inches (W)) Use when embroidering tubular and curved fabric, such as shirt sleeves and trousers. (For details on attaching this frame, refer to "Using the Optional Cap Frame" on page 258.) Consult your nearest Brother dealer. Embroidery frame holder C (optional) Note ● The embroidery frame indicators show all embroidery frame sizes in which the embroidery pattern can be sewn. Be sure to use an embroidery frame of the most suitable size. If the embroidery frame that is used is too large, the pattern may be misaligned or the fabric may pucker. ● All genuine embroidery frames that can be used with PR-600, PR-600II, PR-620 and PR-650 can be installed on this machine. ● When sewing with a following optional embroidery frame; jumbo frame, border frame, quilt frame or flat frame, the included table must be installed to the machine. ● Due to the weight of the embroidery frame and fabric it is recommended that the included table be used, to prevent the frame holder from bending, which may result in the distortion of your design or machine damage. 92